KVM虚拟机NAT模式网络无法连接

您所在的位置：网站首页 › virt manager no active connection › KVM虚拟机NAT模式网络无法连接

KVM虚拟机NAT模式网络无法连接

2024-07-10 21:11| 来源: 网络整理| 查看: 265

1. 问题发生

在使用virt-manager启动虚拟机后，使用一段时间后突然虚拟机网络断开，并不知道是什么原因导致。

2. 解决问题

可以看到虚拟机是使用NAT模式连接主机网络的。在这里插入图片描述这里使用的是virt-manager创建虚拟机时提供的default网络配置xml文件。首先查看virt-manager的网卡接口，如下图中的virbr0就是KVM为虚拟机创建的网卡接口，也是作为一个switch和bridge，将包分发到KVM中的各个虚拟机。在这里插入图片描述通过virsh重新启动default接口，提示信息显示，该接口是正常工作的。通过brctl命令也可以看到virbr0网络接口也是在正常开启的。到这里就很奇怪了，不知道该从和下手，在突然尝试将libvirtd服务重新启动时，看到启动时报错了。

imaginemiracle:~$ service libvitd status ● libvirtd.service - Virtualization daemon Loaded: loaded (/lib/systemd/system/libvirtd.service; enabled; vendor preset: enabled) Active: active (running) since Thu 2021-07-01 16:28:46 CST; 3s ago TriggeredBy: ● libvirtd-admin.socket ● libvirtd-ro.socket ● libvirtd.socket Docs: man:libvirtd(8) https://libvirt.org Main PID: 41796 (libvirtd) Tasks: 19 (limit: 32768) Memory: 35.2M CGroup: /system.slice/libvirtd.service ├─19069 /usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf --leasefile-ro --dhcp-script=/usr/lib/libvirt/libvirt_leaseshelper ├─19070 /usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf --leasefile-ro --dhcp-script=/usr/lib/libvirt/libvirt_leaseshelper └─41796 /usr/sbin/libvirtd 7月 01 16:28:46 Linux-wxn systemd[1]: Starting Virtualization daemon... 7月 01 16:28:46 Linux-wxn systemd[1]: Started Virtualization daemon. 7月 01 16:28:47 Linux-wxn libvirtd[41796]: libvirt version: 6.6.0, package: 1ubuntu3.5 (Christian Ehrhardt Wed, 07 Apr 2021 13:33:46 +0200) 7月 01 16:28:47 Linux-wxn libvirtd[41796]: hostname: Linux-wxn 7月 01 16:28:47 Linux-wxn libvirtd[41796]: internal error: firewalld is set to use the nftables backend, but the required firewalld 'libvirt' zone is missing. Either set the firewalld backend to 'iptables', or ensure that firewalld has a 'libvirt' zone by upgrading firewalld to a version supporting rule priorities (0.7.0+) and/or rebuilding libvirt with --with-firewalld-zone 7月 01 16:28:47 Linux-wxn dnsmasq[19069]: read /etc/hosts - 7 addresses 7月 01 16:28:47 Linux-wxn dnsmasq[19069]: read /var/lib/libvirt/dnsmasq/default.addnhosts - 0 addresses 7月 01 16:28:47 Linux-wxn dnsmasq-dhcp[19069]: read /var/lib/libvirt/dnsmasq/default.hostsfile

可以看到这个错误是由于Linux的防火墙引起的，在网上找了很多解决方案却还是不能解决，于是直接将Linux的防火墙关闭，再次重启libvirtd服务错误解决，KVM中的虚拟机正常连接网络。

imaginemiracle:~$ sudo service firewalld stop imaginemiracle:~$ sudo service libvitd restart ● libvirtd.service - Virtualization daemon Loaded: loaded (/lib/systemd/system/libvirtd.service; enabled; vendor preset: enabled) Active: active (running) since Thu 2021-07-01 16:33:00 CST; 41min ago TriggeredBy: ● libvirtd-admin.socket ● libvirtd-ro.socket ● libvirtd.socket Docs: man:libvirtd(8) https://libvirt.org Main PID: 42261 (libvirtd) Tasks: 21 (limit: 32768) Memory: 40.8M CGroup: /system.slice/libvirtd.service ├─19069 /usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf --leasefile-ro --dhcp-script=/usr/lib/libvirt/libvirt_leaseshelper ├─19070 /usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf --leasefile-ro --dhcp-script=/usr/lib/libvirt/libvirt_leaseshelper └─42261 /usr/sbin/libvirtd 7月 01 16:33:00 Linux-wxn dnsmasq[19069]: read /etc/hosts - 7 addresses 7月 01 16:33:00 Linux-wxn dnsmasq[19069]: read /var/lib/libvirt/dnsmasq/default.addnhosts - 0 addresses 7月 01 16:33:00 Linux-wxn dnsmasq-dhcp[19069]: read /var/lib/libvirt/dnsmasq/default.hostsfile 7月 01 16:33:12 Linux-wxn libvirtd[42261]: libvirt version: 6.6.0, package: 1ubuntu3.5 (Christian Ehrhardt Wed, 07 Apr 2021 13:33:46 > 7月 01 16:33:12 Linux-wxn libvirtd[42261]: hostname: Linux-wxn 7月 01 16:33:22 Linux-wxn dnsmasq-dhcp[19069]: DHCPREQUEST(virbr0) 192.168.122.245 52:54:00:11:c0:55 7月 01 16:33:22 Linux-wxn dnsmasq-dhcp[19069]: DHCPACK(virbr0) 192.168.122.245 52:54:00:11:c0:55 Linux-IM 7月 01 17:03:22 Linux-wxn dnsmasq-dhcp[19069]: DHCPREQUEST(virbr0) 192.168.122.245 52:54:00:11:c0:55 7月 01 17:03:22 Linux-wxn dnsmasq-dhcp[19069]: DHCPACK(virbr0) 192.168.122.245 52:54:00:11:c0:55 Linux-IM

在这里插入图片描述

3. Error starting domain: Requested operation is not valid: network ‘default’ is not active imaginemiracle:~$ virsh net-start default error: Failed to start network default error: internal error: firewalld is set to use the nftables backend, but the required firewalld 'libvirt' zone is missing. Either set the firewalld backend to 'iptables', or ensure that firewalld has a 'libvirt' zone by upgrading firewalld to a version supporting rule priorities (0.7.0+) and/or rebuilding libvirt with --with-firewalld-zone imaginemiracle:~$ sudo service firewalld stop imaginemiracle:~$ sudo service libvirtd restart imaginemiracle:~$ virsh net-start default Network default started 总结

由于防火墙的原因导致虚拟机无法通过NAT连接主机网络，关闭防火墙即可，到此算是解决了该问题吧！(由于不明发生的原因，防火墙为什么导致libvirtd服务启动default网络失败，只能算作是表面上的解决)

【本文地址】

KVM虚拟机NAT模式网络无法连接

KVM虚拟机NAT模式网络无法连接

今日新闻

推荐新闻